USE CODE CYBERMONDAY FOR 30% OFF AT CHECKOUT
HTZ i40
HTZ i40
HTZ i40

HTZ i40

$439.95
Select Product
View Specs
Product Description

HTZ i40 is a purpose-built 27.5" eMTB wheel for riders who run a mullet setup with a wide 2.8" tire on the rear. HTZ wheels allow you to smash through rock gardens with confidence and not worry about if your wheels will make it through the ride. What makes HTZ wheels e-bike specific? An asymmetric rim design with 20% thicker walls, a heat-treated steel freehub body with six pawls of simultaneous engagement, oversized 17mm axle sleeves, double-stacked Enduro sealed bearings at the inboard end of the driver body and rotor mount heat sinks all create a bombproof wheelset specifically tailored to meet the demands of full-power eMTBs. Every component of our new HTZ wheels was meticulously designed to create the most dependable e-specific wheels on the market.

Usage: E-Bike
Features
Technology
View the Specs
FAQs
Reviews

FEATURES

+
+
+
+
+
+
1
20% THICKER RIM WALLS
HTZ i40 tubeless-ready rims boast an increased wall thickness of 20% over our already-burly KOM Tough enduro rims to help ensure they’re capable of withstanding the additional forces of modern eMTBs. We didn’t simply add material and call it good, though. Asymmetric spoke offset helps balance spoke length and tension to create a more stable wheel while a symmetric outer rim profile distributes impact forces evenly through the rim. HTZ rims also feature a vertical I-Beam support within the inner rim cavity to drastically increase the strength and rigidity of our toughest alloy rims.
2
PURPOSE-BUILT E-BIKE HUB
Features a heat-treated steel freehub body, which eliminates gouging and prevents pawl socket failure under load. HTZ hubs feature a 6-pawl ratchet system with simultaneous engagement of all pawls to distribute pedaling forces more evenly and improve reliability on bikes with high-torque motors. The outer diameter of the rear axle sleeve has been increased from 15mm to 17mm to increase durability while remaining compatible with traditional 12mm thru-axles. This reduces axle flex while cornering and pedaling, which results in improved ride quality and bearing longevity. Double-stacked, sealed Enduro bearings at the inboard end of the driver body further improve durability and extend bearing life.
3
13-GAUGE BUTTED SPOKES
Wheel strength is limited by its weakest point, which is why the complete build spec is as meticulous as the component designs themselves. HTZ wheels feature 13-gauge butted (2.3/2.0mm) spokes that are oversized at the hub to increase wheel stiffness and durability, with the thickest section at the hub to counteract the higher braking forces and increased motor torque of an e-bike.
4
SOLID STRIP AND ON-RAMP
WTB's unique Solid Strip is a durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and therefore ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each spoke hole indentation during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. On-Ramp provides a consistent slope away from the rim valley and allows a tire bead to quickly mount on the rim. On-Ramp also allows riders to easily pop the tire bead to the rim valley during tire removal.
5
OVERSIZED 17MM AXLE SLEEVE
We increased the outer diameter of the rear axle sleeve from 15mm to 17mm to increase durability while remaining compatible with traditional 12mm thru-axles. This reduces axle flex while cornering and pedaling, which improves ride quality and bearing longevity. Double-stacked, sealed Enduro bearings at the inboard end of the driver body further improve durability and extend bearing life.
6
ROTOR MOUNT HEAT SINK
HTZ hubs feature a heat sink behind the 6-bolt rotor mount to dissipate heat up to 10% better on long descents. Cooler rotors increase braking power and provide the rider with more confidence despite the extra weight of an e-bike.
7
PERFECT FOR 2.8 x 27.5" REAR TIRES
The 40mm inner rim width of our HTZ i40 27.5" wheel makes it the perfect option for mullet setups with a 2.8" wide tire on the rear. We suggest pairing it with our Vigilante 2.8 x 27.5" to achieve unbeatable traction in terrain ranging from smooth-and-fast to steep-and-deep.
MARK WEIR APPROVED
“E-bikes get you deeper, farther, and faster than a traditional bike. Having strong, durable parts is crucial to prevent getting stranded out in the woods. HTZ wheels give me the extra security and peace of mind I need when I’m deep in the pines.”

- Mark Weir, godfather of American enduro and daily e-bike thrasher
HAND-BUILT IN CALIFORNIA
Every HTZ wheel sold in North America is hand-built at our wheel building facility in California, while wheels sold in Europe are hand-built in Italy. Both facilities follow a six-step dewinding process to deliver equal spoke tension and worry-free riding. This process eliminates any winding stresses in the spokes that would otherwise release while riding. Combine this process with mechanically locking nipples and HTZ wheels will hold tension and stay true even through the most strenuous of rides.
Read The FAQs
PRESS REVIEWS
"Really impressed"
- MTB MAG
"Excellent value"
- Singletracks
30 Day Return Policy
Decide a product wasn't for you? Return any unused product for up to 30 days with no questions asked.
Ride with confidence guarantee
Our CZR carbon rim replacement policy has you covered, regardless of what happens on the trail.
Warranty Policy
We guarantee our products for at least two years. CZR carbon rims receive an additional lifetime warranty.